*** Please Note: STOCK LEVELS ARE NOT IN REAL-TIME*** Post to Post and Over the Post
IMMIX electroplated gunmetal finish handrail horizontal turn connector made from high quality zinc alloy diecast.
This high quality landing connector by Richard Burbidge allows you to connect two handrails together at right angles.Suitable for Immix handrails only.
The connector has two fixing arms that fit into the handrail slot allowing it to be secured in place with screws. Each fixing arm has two fixing holes.
Overall dimensions: 63 x 72 x 55mm. All relevant fixings are included. Richard Burbidge fitting instructions are included with the top rake connector.
After care - clean with soapy water. Do not use polish.
- IMMIX gunmetal finish horizontal turn
- Connects Immix landing handrails to each other at 90 degrees
- Overall dimensions: 63 x 72 x 55mm
- Includes fixings
- Depth of recess : 3mm
- Pack qty 1
- Post to Post and Over the Post
- 48 hour delivery MAY VARY
- ***Please Note - STOCK LEVELS are NOT in Real-Time. Due to high and continual demand, some products will be placed on Back Order and will NOT be available within 48 Hours. Lead times may be substantially longer***
